CNC T2010 G  
   
FEATURES
  • Control of 4 axes: transversal  X -Y axes (wheel centre) , vertical Z -axis ( headstock ) , T-axis (table)
  • Control of the grinding wheel drive with constant surface speed
  • Handwheel commutable on all axes
  • Dressing on  headstock or table
  • Dressing  of profiled grinding wheels
  • Dressing recall from program or through button
  • Grinding wheel wear compensation
  • Machining with feeds by means of  handwheel
  • Parametric fixed cycles with controlled graphic setting   
  • Linear and circular interpolation on  ZY axes  for forming and dressing of the grinding wheel
  • Centering correction
  • nclined surfaces grinding
  
PROGRAMMING    
  • Linear and circular interpolation
  • Feeds  in mm/min.
  • Coordinates in mm or inch.
  • Absolute or incremental coordinates
  • Cartesian or Polar  coordinate programming
  • Zero point change
  • High-level geometric programming
  • Parametric programming
  • Radius correction
  • Definition  and storage of  grinding wheel profile
  • Recall of fixed cycles  with CYCLE(..,...,.., etc..)



 
 

FIXED CYCLES    
  • Plunge-cut grinding with vertical Z axis feeds on table traverse reverse
  • Plunge-cut grinding with transversal axis hunting and  vertical Z axis feeds on axis  traverse reverse
  • Grinding with manual feed by means of handwheel   
  • Plunge-cut grinding with transversal axis feed on on table traverse reverse