CNC T2010 - CARATTERISTICHE GENERALI

HARDWARE

PC multiprocessor structure for operator interface and NC cards controlled by a 32 bit RISC multiprocessor PC module equipped with Pentium MMX 233MHz Intel multiprocessor and 64MB RAM 2,5” 5 Gb Hard disk 1.44Mb Floppy Disk 2 serial ports RS232 or RS422 Parallel port and USB port Ethernet card 10.4” LCD TFT colour display PC QWERTY keyboard controlled by PC with softkeys programmable from PLC and controlled from CNC Remote keyboard connectable to the main keyboard with 4 analogue inputs for feedrate, speedrate potentiometers connection NC module equipped with RISC Intel 960 multiprocessor Axes cards with 9 encoder channels, 8 analogue outputs (14bit resolution) 4 analogue inputs (8bit resolution) and monitoring of encoder signals Digital optoinsulated I/O cards: 64 24Vdc inputs and 64 24Vdc outputs PNP 300mA Multi-languages texts

PERFORMANCES

Up to 16 interpolated axes, controllable by analogic reference +-10V or by Sercos interface Up to 2 spindles with angular positioning and interpolated as C axis 3 connectable handwheels Up to 256 digital inputs and 256 digital outputs Speed of block processing > 1000 blocks/sec. Speed of block execution : 300 blocks/sec. Sampling time: from 2 up to 5msec. Look ahead of 1400 blocks Up to 4 machinings executable simultaneosly with 4 simultaneous interpolations on different axes Programs processing available on hard disk or using directly Ethernet Execution of programs with large dimensions without size limits Axes control with s-curve acceleration and deceleration with zero servo error Linear interpolation with all interpolating axes : circular interpolation on plane, helicoidal and spheric on space Mechanic errors correction Backlash compensation Software CN resident on files

PROGRAMMING

Programs editing directly through keyboard using program editor, floppy disk or Ethernet interface ISO programming language Conversational programming with interactive graphic Geometric high-level programming for direct contour programming through points, lines and circles definition Parametric programming with algebraic and trigonometric operators and conditional jumps Teach-in programming with read in of program blocks Recall of underprograms inside or outside the main program Contours definition and storage Fixed cycles for turning, milling and grinding machine Possibility to create fixed cycles through parametric programming Graphic simulation of the loaded program with tool display Graphic visualization of the contour programmed in 2D and 3D Restart of the interrupted machining cycle with controlled re-positioning of axes position and of the auxiliary functions Programs storage in DOS on hard disk Display of the files list in the hard disk, on floppy disk or Ethernet Possibility to cancel, to copy and to rename the selected file Files storage on floppy disk or Ethernet

INTEGRATED PLC

“C” programming language Complete access to all NC data Possibility to drive the axes in singular or interpolating way Management and customation of NC softkeys Compiler on NC

TOOL MANAGEMENT

256 tables of tool correctors with: Tool type Tool orientation (turning machine) Lenght correction Wear compensation Radium correction Cutting and rake angles (turning machine) Wear correction settable also during the machining Tool tables on files